THE NAD C372 IS A WELL BUILT AND EASY TO USE STEREO INTEGRATED AMPLIFIER CREATED AND MANUFACTURED BY NAD ELECTRONICS IN 2005. IT IS 435.0MM X 132.0MM X 350.0MM (W X H X D) IN DIMENSION AND WEIGHT IS APPROXIMATELY 11.2KG. TRANSFORMER USED IN NAD C372 IS A HIGH-CURRENT TOROIDAL TRANSFORMER MADE BY HOLMGREN, SWEDEN.
THE FRONT PANEL CONTAINS SEVERAL INPUT-SELECTOR BUTTONS, A/B SPEAKER SWITCHING, AND A HEADPHONE JACK, ALONG WITH VOLUME, BALANCE AND TONE CONTROLS. GREEN LEDS ABOVE EACH OF THE INPUT SELECTORS INDICATE WHICH IS BEING USED, AND AN LED ABOVE THE POWER SWITCH SHINES AMBER WHEN THE C372 IS IN STANDBY AND GREEN WHEN IT IS ON. TONE-DEFEAT SWITCH THAT ALLOWS BYPASSING THESE ADJUSTMENTS. OPTION OF OPERATING THE C372 IN BRIDGED MODE, INCREASING ITS POWER OUTPUT TO 400W (INTO 8 OHMS). THE SECOND PRE-OUT MAY ALSO BE USED TO ADD A POWERED SUB WOOFER. SOFT CLIPPING CIRCUITRY. WITH THIS CIRCUIT SWITCHED ON, THE C372 WILL SHUT DOWN IF IT IS DRIVEN TOO HARD AND STARTS TO CLIP.
THERE ARE SEVEN LINE INPUTS THAT CAN BE USED TO CONNECT EXTERNAL AUDIO VIDEO EQUIPMENT. THERE ARE ALSO TWO PRE-AMP OUTPUTS. THESE CAN BE USED TO ADD A SECOND AMPLIFIER. THE BUTTONS ARE LARGE AND WELL PLACED SO THAT BASIC OPERATIONS ARE EASY.
A/B SPEAKER SWITCHING, HEAD PHONE JACK ALONG WITH VOLUME, BALANCE AND TONE CONTROLS. TONE-DEFEAT SWITCH THAT ALLOWS BYPASSING BASS TREBLE ADJUSTMENTS.
THE NAD C372 HAS A CONTINUOUS AVERAGE POWER OUTPUT OF 2 X 170 W INTO 8 OHMS WITH A RATED DISTORTION (THD 20 HZ-20 KHZ) OF 0.02%. THE CLIPPING POWER
(MAX CONT.POWER/CHANNEL) OF THE NAD C372 IS APPROXIMATELY 180W (22.55DBW). THE POWER AMP OF THE NAD C372 HAS A 3DB IHF DYNAMIC HEADROOM AT 8OHMS AND A IHF DYNAMIC POWER OF 220W (23.42DBW) AT 8 OHMS, 340W (25.31DBW) AT 4 OHMS, AND 460W (26.62DBW) AT 2 OHMS. ITS DAMPING FACTOR IS MORE THAN 150 AND IT HAS A ±0.3DB FREQUENCY RESPONSE AT 20 HZ-20 KHZ AND -3DB AT 3 HZ-70 KHZ.
Reviews
There are no reviews yet.